|
3rd November 2006, 04:23 PM | #1 |
Senior Member
Professional user
Join Date: Jul 2005
Location: France
Posts: 737
|
Re: double/triple faces?
Hi CGMike,
this is a problem I've never experienced myself as far as I can remember. I don't really understand what were you first modeling steps with the geometry displayed on the pictures ... a polyline (with inserted vertices) extruded on -Z ? Just a thought, have you tried extruding edges by only using the menu (vertex/extrude edges) and not the CTRL+E keys on your keyboard (just in case you could be pushing CTRL+E more than one time sometimes) ?
__________________
OL. |
4th November 2006, 05:21 PM | #2 | |
Junior Member
Member
Join Date: Oct 2006
Posts: 11
|
Re: double/triple faces?
Quote:
I'm not pressing more than once. While doing testing of it I made sure I was not pressing more than once. So that's not it. Like I said, it happens randomly, I can go for 10 minutes without a single incident.. sometimes it happens 2 or 3 times within a few minutes... it's very random. |
|
5th November 2006, 12:13 AM | #3 | |
Senior Member
Professional user
Join Date: Jul 2003
Posts: 899
|
Re: double/triple faces?
Quote:
Using the menu can be tedious, of course, but another option is to add Extrude Edges to the toolbar using the toolbar editor ( http://www.ac3d.org/forum/showthread.php?t=3688 ). Again, just to see whether it is keyboard related. Another option if you do not want to install the toolbar editor is to use the attached tcl file. Drop this into the "scripts" folder under your AC3D installation folder and restart AC3D, and you will get a new "Extrude Edges..." menu item under the Tools menu. Issuing this will bring up a stay-on-top window with an "Extrude edges" button so you don't have to use the menu every time. Simply delete the file when you don't want the command present any more. Since keyboards can have problem keys that temporarily "stick" for a second or two after being released, this may be the cause of the problem you're seeing. Being able to eliminate/confirm whether this is an issue may lead toward solving the problem. Good luck |
|
5th November 2006, 04:04 PM | #4 | |
Junior Member
Member
Join Date: Oct 2006
Posts: 11
|
Re: double/triple faces?
Quote:
Can I reassign the shortcut key to something different? |
|
5th November 2006, 05:29 PM | #5 | |
Senior Member
Professional user
Join Date: Jul 2003
Posts: 899
|
Re: double/triple faces?
Quote:
I don't believe it's possible to have the edge extrusion happen twice without two extrusion commands being sent to AC3D (via keyboard/menu/button), but only Andy/Inivis could verify this. As before, however, if you can repeat it via button/menu rather than keyboard, that would certainly give them something to look at. I find I *can* reproduce this by holding down the "E" key just a tad longer than normal (my keyboard repeat rate is set to the shortest delay possible). If I turn down the key repeat rate to Long, it ceases to happen, of course. Good luck |
|
|
|